logocree     Logo-Intematix       

Dimmer

Sequencer

EN0723

  • Selection of colors, colors cycle and desired speed.
  • Settings are automatically stored and resumed at power on.
  • Control from external buttons (not included) available radio remote control version and/or IR remote control and receiver version.
  • Possibility to connect more sequencers and synchronize them.

TUNABLE WHITE DIMMER

EN0723

  • Setting of the desired white color temperature
  • Setting of the desired brightness level.
  • Controller with soft start: when it is powered on/off, the output is gradually activated/deactivated.
  • Brightness and white CCT are automatically stored and resumed at power on.
  • Control from external buttons (not included) - radio remote control version available.

Dimmer board for power supply 0-10V

EN1259

EN1259 dimmer board is the ideal solution for systems with power supply 0-10V. Connected directly to the power supply 0-10V, it makes possible to dim the light source from the switch in use, without structural interventions or cables. For more information, also about dimming mode, see the Datasheet.

 

Powering up the board, the output will lead to the set value.
Turning off and on three times in succession the card will go into programming
mode and will start to vary the output from maximum to minimum and vice versa.
Upon reaching the desired brightness power cycle the power to save the current
state, that state will be proposed to the next switch.

Dimmer

EN0723

  • Setting of desired brightness level.
  • Brightness is automatically stored and resumed at power on.
  • Control from external buttons (not included) radio remote control version available.
  • Possibility to connect more dimmers and synchonize them.

Dimmer board for DALI power supply

EN1310

EN1310 dimmer board is the ideal solution for systems with power supply DALI. Connected directly to the power supply DALI, it makes possible to dim the light source from the switch in use, without structural interventions or cables. For more information, also about dimming mode, see the Datasheet.

Powering up the board, the output will lead to the set value.
Turning off and on three times in succession the card will go into programming
mode and will start to vary the output from maximum to minimum and vice versa.
Upon reaching the desired brightness power cycle the power to save the current
state, that state will be proposed to the next switch.

Color Dimmer

EN0723

  • Selection of brightness level and color cycle.
  • Brightness and color cycle are automatically stored and resumed at power on.
  • Control from external buttons (not included) radio remote control version available.
  • Possibility to connect more dimmers and synchronize them.

Key dimmer for profiles

EN0928

  • ON/OFF and dimming by pressing the integrated key.
  • Brightness is automatically stored and resumed at power on.
  • Suitable also to be installed into profiles.

Key dimmer

EN0801

  • ON/OFF and dimming by pressing the integrated key.
  • Brightness is automatically stored and resumed at power on.
  • Available the version for control from external button (not included).
  • Available the version "always ON" (at first feeding the device starts from on status).

Dimmer Key 4A

EN0801-BOX

  • ON/OFF and dimming by pressing the external button (not included).
  • Supplied complete of cables fot the power source, the exit and the external button (not included) for easy installation.

Dimmer touch 1

EN0882

  • ON/OFF (switch touch version) and also dimming (dimmer touch version) by touch.
  • Presence of two LEDs indicating ON (green) and OFF (red) status (only for not resined version).
  • Possible installation behind glass or plexiglass with max thickness 4mm.

Dimmer touch 2

EN1060

  • ON/OFF (switch touch version) and also dim (dimmer touch version) by touch.
  • Possible installation behind glass or plexiglass with max thinckness 4mm.

Dimmer and touch for profiles

EN167

  • ON/OFF (switch touch version) and also dimming (dimmer touch version) by pressing the integrated spring.
  • In the center of the spring there is a blue LED, always on, for an immediate identification of the touch.
  • Suitable also to be installed into profiles.